주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

jg44070- 에 의해 수정

편집 거부됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw.
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This maywill come loose while prying the battery connector from its socket.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This maywill come loose while prying the battery connector from its socket.