메인 컨텐츠로 가기

#1 단계의 변경 사항

Rick Marshall- 에 의해 수정

편집 승인됨 에 의해 Jake Devincenzi

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* black] Use a plastic opening tool to gently detach the battery connector from the device.