주요 콘텐츠로 건너뛰기

#3 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use a plastic opening tool to gently detach the battery connector from the socket on the devicelogic board. Start lifting off the connector from the bottom side, by placing the tip of the tool between the loudspeaker enclosure and the metal cover of the connector.
[* black] Use a plastic opening tool to gently detach the battery connector from the socket on the devicelogic board. Start lifting off the connector from the bottom side, by placing the tip of the tool between the loudspeaker enclosure and the metal cover of the connector.
[* icon_note] The battery connector comes off vertically from the logic board. Do not apply force sideways.
[* icon_caution] Be careful not to rip off the battery connector socket soldered on the logic board. There are 4 very small soldering points awaiting this mistake!