주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a plastic opening tool to gently detachpry up the battery connector from theits socket on the logic board. Start lifting off the connector from the bottom side, by placing
[* black] Place
the tip of the tool between the loudspeaker enclosure and the metal cover of the connectorconnector, and lift the bottom edge of the connector first.
[* black] Use a plastic opening tool to gently detachpry up the battery connector from theits socket on the logic board. Start lifting off the connector from the bottom side, by placing
[* black] Place
the tip of the tool between the loudspeaker enclosure and the metal cover of the connectorconnector, and lift the bottom edge of the connector first.
[* icon_note] The battery connector comes off vertically from the logic board. Do not apply force sideways.
[* icon_caution] Be careful not to rip offpry at the battery connector socket soldered onitself, or it may detach from the logic board. There are 4four very small solderingsolder points awaiting this mistake!
[* icon_caution] Be careful not to rip offpry at the battery connector socket soldered onitself, or it may detach from the logic board. There are 4four very small solderingsolder points awaiting this mistake!