주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Rob Hendricks- 에 의해 수정

편집 승인됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a plastic opening tool to pull the pressure contact from underneath the battery connector.
[* icon_caution] When reinstalling the pressure contact, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
[* icon_caution] Take notice of the small black ground clip on the upper screw of the battery connector.
[* black] Be '''VERY''' careful not to remove the pressure contact point from the logic board