Skip to main content

#3 단계의 변경 사항

Eric H- 에 의해 수정

편집 거부됨 에 의해 Walter Galan

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Use a plastic opening tool to pull the pressure contact from underneath the battery connector.
[* icon_caution] When reinstalling the pressure contact, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
[* icon_caution] Take notice of the small black ground clip on the upper screw of the battery connector.
[*
black] Be '''VERY''' careful not to remove the pressure contactbattery connection point from the logic board. There are 4 very small soldering points awaiting this mistake!
[* icon_caution] Take notice of the small black ground clip on the upper screw of the battery connector.
[*
black] Be '''VERY''' careful not to remove the pressure contactbattery connection point from the logic board. There are 4 very small soldering points awaiting this mistake!