메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.
[* icon_caution] Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.
[* black] Remove the battery.
[* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.
[* icon_reminder] If your replacement battery came with an uncreased cable, carefully [https://d3nevzfk7ii3be.cloudfront.net/igi/uCUSMslVwAiUK1TB|crease the cable into the proper shape|new_window=true] before installing the battery into the phone.
[* icon_reminder] While installing the replacement battery, temporarily connect the battery connector to the phone to ensure proper alignment. Once the battery is glued in place, disconnect the battery connector.
[* icon_reminder] Perform a [guide|44481|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.