#6 단계의 변경 사항
acselle- 에 의해 수정
편집 승인됨 에 의해 Arthur Shi
- 삭제되었습니다
- 추가
- 변경 사항이 없습니다
스텝 라인
| [* black] Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone. |
| [* icon_caution] Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily. |
| [* black] Remove the battery. |
| [* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from |
| [* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from |
| [* icon_reminder] If your replacement battery came with an uncreased cable, carefully [https://d3nevzfk7ii3be.cloudfront.net/igi/uCUSMslVwAiUK1TB|crease the cable into the proper shape|new_window=true] before installing the battery into the phone. |
| [* icon_reminder] While installing the replacement battery, temporarily connect the battery connector to the phone to ensure proper alignment. Once the battery is glued in place, disconnect the battery connector. |
| [* icon_reminder] Perform a [guide|44481|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting. |