주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

John Schutz- 에 의해 수정

편집 거부됨 완료자 Geoff Wacker

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a plastic opening tool to pull the pressure contact from underneath the battery connector.
[* icon_caution] When reinstalling the pressure contact, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
[* icon_caution] Take notice of the position of the pressure contact on the upper screw of the battery connector. This clip is hold only by the upper screw. When reinstalling, it must be aligned so the gold contact point will press against the back cover.