물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 iRobot-

편집 승인됨 완료자 iRobot

이전
이후
변경 사항 없음

단계 라인

[* red] With a Phillips #00 screwdriver, remove the one 3.8 mm screw in the LED chip. The LED chip is a small green chip (about 1 square centimeter) located at the top center of the device.
-[* black] Gently remove the chip with a pair of precision tweezers by grabbing the chip from one side, being careful not to pinch on a black piece of hardware on the chip.
+[* black] Gently remove the chip with a pair of precision [product|IF145-020|tweezers] by grabbing the chip from one side, being careful not to pinch on a black piece of hardware on the chip.