주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Walter Galan- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the five cables near the top of the logic board in the following order:
[* red] Headphone jack/volume button cable
[* orange] Power button cable
[* yellow]
Front facing camera cable
[* greenyellow] Digitizer cable
[* bluegreen] Display data cable
[* blue] Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)

[* blackicon_note] To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
[* orange] Power button cable
[* yellow]
Front facing camera cable
[* greenyellow] Digitizer cable
[* bluegreen] Display data cable
[* blue] Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)

[* blackicon_note] To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
[* icon_caution] Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전