주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

slingerfu- 에 의해 수정

편집 거부됨 에 의해 Reed Danis

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following screws securing the logic board to the case:
[* red] One 2.5 mm Phillips screw near the vibrator motor[http://ow.ly/SgU8v|vibrator motor]
[* red] One 2.5 mm Phillips screw near the vibrator motor[http://ow.ly/SgU8v|vibrator motor]
[* orange] One 2.4 mm Phillips screw
[* yellow] One 3.6 mm standoff along the side of the logic board nearest the battery opening.
[* icon_note] Use a small flathead screwdriver to remove the single 3.6 mm standoffscrew.