메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

GradStudents2011- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Completely separate the back cover from the rest of the camera. SetCarefully set aside this back cover carefullycover.
[* black] Completely separate the back cover from the rest of the camera. SetCarefully set aside this back cover carefullycover.
[* black] Then, unscrew the four screws fastening the front outer cover to the camera (see image #3 for screw locations).
[* black] When these screws are removed, use a spudger to carefully pry the front outer cover away from the camera. Do this gently to avoid damaging the yellow and black wires connecting the front outer cover to the camera.