주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Jake Devincenzi- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Slide the pointed end of the spudger into the slot under the upper right corner of the ear speaker and pry gently upwards.
- [* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. This does not matter too much if you are installing a new speaker, but it doesn't hurt to keep the old one intact, so be sure to pry the entire assembly up.
+[* black] Slide the pointed end of the spudger into the slot under the upper right corner of the ear speaker and gently pry upwards.
+ [* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. Be sure to pry the entire assembly up.
[* black] Lift the ear speaker up and out of the device.