Skip to main content

#4 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] GraspUse the endtip of a spudger to slide the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand. Slide the logic boardclick wheel ribbon cable out of its holding brackets on the rear of the displaysocket.
[* icon_note] The logic board is still connected to the iPod by twothe display ribbon cablescable.
[* black] GraspUse the endtip of a spudger to slide the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand. Slide the logic boardclick wheel ribbon cable out of its holding brackets on the rear of the displaysocket.
[* icon_note] The logic board is still connected to the iPod by twothe display ribbon cablescable.

이미지 1

이전 버전

새로운 버전

이미지 2

삭제되었습니다