주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#3단계의 변경 사항

Navy Vet 2015- 에 의해 수정

편집 승인됨 완료자 Navy Vet 2015

이전
이후
변경 사항이 없습니다

단계 라인

[title] Prep the Back Controller Shell for Restaining
[* icon_note] This step is optional but recommended. If your cleaning a white shell controller follow these steps for the front shell also.
[* black] Using whatever sink suits you best use hot/warm water and antibacterial soap and clean the back cover by hand. Be sure to also clean the inside of the cover to remove any dirt/dust that's been sitting in there.
[* icon_note] If preserving the sticker is important to you then take care and be gentle when washing the sticker on the back cover. Use gentle pressure with your fingers in this area.
[* icon_note] Sometimes there are "trouble spots" or dirt patches on the cover and can remain after you wash it. Take note of these spots and pay extra attention to them when washing. If they remain, even after a vigorous cleaning use a Qtip and rubbing alcohol to try and remove the spot. If a Qtip doesn't work simply use it to wet the trouble spot and use a
[* icon_note] plastic prying tool to scrape it off. Sometimes they require significant force to remove and the plastic tool doesn't scratch the cover. Nail polish remover can be used here but I don't recommend it.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가