메인 콘텐츠로 스킵하기

이 단계의 변경 사항

Mick O'Connor- 에 의해 수정

편집 거부됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] ADDITIONAL NOTES
[* black] I have just finished replacing the shocks and mount.
[* black] Found it more convenient to remove the 4 bolts holding the ball joint plate to the strut pole. Don't forget to replace the old bolts with new OR at least use LocTite if you want to re-use the old bolts. DO NOT use a lot of the LocTIte, only a couple of drops, one on each side of the bolt.
[* black] Use a big trolley jack and make it a good one. See the one in Step 10 - this best for the job. If you can get the job done in a DIY garage then do it there. Consider the cost as a learning fee for yourself.