메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

David Hodson- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] The steering knuckle is held to the control arm by a single bolt.
[* red] Place a breaker bar with an 18 mm socket over the nut on the bottom of the control arm.
[* icon_note] The breaker bar alone will not be able to loosen the nut, since the bolt is free to rotate.
[*
black] Insert wisdom herePlace an 18 mm box end wrench over the bolt on top of the control arm.
[* black] Turn the breaker bar and the wrench in their respective counterclockwise directions to loosen and remove the knuckle-to-control arm bolt
.
[* icon_note] The steering knuckle is held to the control arm by a single bolt.
[* red] Place a breaker bar with an 18 mm socket over the nut on the bottom of the control arm.
[* icon_note] The breaker bar alone will not be able to loosen the nut, since the bolt is free to rotate.
[*
black] Insert wisdom herePlace an 18 mm box end wrench over the bolt on top of the control arm.
[* black] Turn the breaker bar and the wrench in their respective counterclockwise directions to loosen and remove the knuckle-to-control arm bolt
.