메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

Scott Dingle- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] The steering knuckleball joint is held to the control arm by three 18 mm bolts.
[* icon_note] The steering knuckleball joint is held to the control arm by three 18 mm bolts.
[* red] Remove the bottom two nuts with a breaker bar or long wrench.
[* orange] Place a breaker bar over the gold nut on the bottom of the control arm.
[* icon_note] The breaker bar alone will not be able to loosen the nut, since the bolt is free to rotate.
[* black] Place an 18 mm box end wrench over the bolt on top of the control arm.
[* black] Turn the breaker bar and the wrench in their respective counterclockwise directions to loosen and remove the third knuckle-to-controlball joint-to-control arm bolt.
[* black] Turn the breaker bar and the wrench in their respective counterclockwise directions to loosen and remove the third knuckle-to-controlball joint-to-control arm bolt.