주요 콘텐츠로 건너뛰기

#12 단계의 변경 사항

David Hodson- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the upper spring seat and pull the spring off the strut assembly.
[* black] If you are installing new springs you will need to remove the spring compressors. Loosen each spring compressor evenly, alternating from side to side until they are off the spring completely.
[*

[*
icon_reminder] When reinstalling your old springs or installing new springs you will need to compress them with the spring compressors before placing them on the strut assembly.
[* icon_note] If you are reinstalling the same springs you may keep the compressors in place until it is time to reassemble the suspension.
[* black] If you are installing new springs you will need to remove the spring compressors. Loosen each spring compressor evenly, alternating from side to side until they are off the spring completely.
[*

[*
icon_reminder] When reinstalling your old springs or installing new springs you will need to compress them with the spring compressors before placing them on the strut assembly.
[* icon_note] If you are reinstalling the same springs you may keep the compressors in place until it is time to reassemble the suspension.