#1단계의 변경 사항
편집자 Steve McGinn-
편집 승인됨 완료자 Andrew Optimus Goldheart
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket. | |
| - | [* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself. |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap (side opposite of where the cable enters), ***not*** the socket itself. |
| [* black] Pull the trackpad ribbon cable straight out of its socket toward the rear edge of the Air. |