주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Corey Brown- 에 의해 수정

편집 승인됨 완료자 Corey Brown

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Insert the loop of the short cord through eyelet from the rear of the pedal Pass cord down and under rear black pulley, and attach spring to loop.
+ [* icon_note] The eyelet is located under the top plate, toward front of the pedal.
+ [* black] Place the cord inside the pedal, under the main cross shaft, and let it lie there for now.
+[* black] Move the pedal to the “toe-up” position.
+[* black] Insert the loop of the long cord through the rear side of eyelet toward the front of the pedal.

이미지 1

이전 이미지 없음

추가