Skip to main content

#3 단계의 변경 사항

Jacob Micallef- 에 의해 수정

편집 승인됨 에 의해 Jacob Micallef

변경 사항이 없습니다

스텝 라인

[* black] Next, undo 2 screws holding the keyboard in place. You'll notice that there is a small keyboard icon next to them.
[* black] Put the hard drive back into the slot, ensuring that the the blue tabs on the corners are snug against the case and that the wire on the bottom right doesn't kink or get damaged.
[* black] The laptop will need to be turned over at this point. Support the hard drive as you turn the laptop right-side-up and lift the screen.