Skip to main content

#4 단계의 변경 사항

Jacob Micallef- 에 의해 수정

편집 승인됨 에 의해 Jacob Micallef

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Turn the keyboard over and '''++gently++''' pop the speaker assembly off. You can use a spudger to push out stubborn parts, but I just used my hands to pull it up.
[* black] There are 3 final screws holding the keyboard to the laptop. Undo those and you can slide the keyboard out. However, it is still attached to a ribbon cable.
[* black] With the ribbon cable, '''++gently++''' lift the black bar holding the ribbon cable in place. Carefully slide it out and the keyboard should completely slide out of the case at this point.
[* black] Congratulations! You're over the hill at this point, get yourself a cookie and glass of milk.

이미지 1

이전 이미지가 없습니다

추가

이미지 2

이전 이미지가 없습니다

추가

이미지 3

이전 이미지가 없습니다

추가