Skip to main content

#4 단계의 변경 사항

Jacob Micallef- 에 의해 수정

편집 승인됨 에 의해 Jacob Micallef

변경 사항이 없습니다

스텝 라인

[* black] Turn the keyboard over and reach in the space between the speaker and the screen. There should be a ledge you can pull up on, or the crevice between the speaker and case. '''++Slowly++''' pull up with your fingers.
[* black] The speaker should mostly pop out on the left side and center, but the right side may need a little encouragement to pop out. A spudger can be helpful in pushing stubborn parts up and out of the case, but I used my fingers. Let the speaker gently rest against the screen, being careful not to pull or damage the 2 black ribbon cables.
[* black] There are 3 final screws holding the keyboard to the laptop. Undo those and you can slide the keyboard out. However, it is still attached to a ribbon cable.
[* black] With the ribbon cable, '''++gently++''' lift the black bar holding the ribbon cable in place. Carefully slide it out and the keyboard should completely slide out of the case at this point.
[* black] Congratulations! You're over the hill at this point, get yourself a cookie and glass of milk.