주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#13단계의 변경 사항

BobJohnson- 에 의해 수정

편집 승인됨 완료자 BobJohnson

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Obvious characteristics of a damaged capacitor are leakage of a brownish fluid, corrosion, or severed leads. Non-obvious signs could be measured with a capacity gauge (for the professional handyman). Search for the pegs of the capacitor on the PCB and warm up the soldering iron. Remember orientation (left-right)!
[* icon_reminder] The capacitor specification should be: 470nF, min. 275 VAC, 22.5 mm pitch. Only use X2-Class qualification which can be seendistinguished on the part. Capacitors come in blue and yellow colors.
[* black] Obvious characteristics of a damaged capacitor are leakage of a brownish fluid, corrosion, or severed leads. Non-obvious signs could be measured with a capacity gauge (for the professional handyman). Search for the pegs of the capacitor on the PCB and warm up the soldering iron. Remember orientation (left-right)!
[* icon_reminder] The capacitor specification should be: 470nF, min. 275 VAC, 22.5 mm pitch. Only use X2-Class qualification which can be seendistinguished on the part. Capacitors come in blue and yellow colors.
[* icon_caution] Caution; the soldering iron will be hot.