#2단계의 변경 사항
편집자 Jacob Micallef-
편집 승인됨 완료자 Jacob Micallef
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] ***GENTLY*** pull the bezel off. I used a small flat-blade screwdriver out of a glasses repair kit to do this. First I gently pried the bezel corners to loosen them, then slowly worked my way around, carefully tugging and pulling the bezel out of the plastic locks. |
|---|---|
| + | [* black] After you have the bezel off, there will be 4 Phillips screws on each side of the screen, near the edges (the picture shown here only shows 1 side). Again, use a Phillips #00 screwdriver to remove them. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가