주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_caution] The fan socket and connector can be seen in the second and third pictures. Do not break the plastic fan socket off the logic board when removing it from its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.
[* black] Use a spudger to pry the fan connector straight up off the logic board.
+[* icon_caution] Be sure to only pry up on the connector itself ***not on the socket*** or you may damage the machine.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

삭제됨