주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#1단계의 변경 사항

Oliver- 에 의해 수정

편집 거부됨 완료자 David Hodson

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] If necessary, peel the EMI gasket off the camera cable connector.
[* black] Disconnect the camera cable by pulling the male end straight away from its socket toward the optical drive opening.
[* icon_caution] Do not try to lift this connector straight up off the board. Pull the connector parallel to the face of the logic board.
[* black] The connector may be fixed by a little black plastic block on the board. This block is only glued, you need to remove it, otherwise the connector must be lifted and gets easily damaged.
[* black] Deroute the camera data cable from the channel in the optical drive.