주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Vasily Zhabin- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.9 mm Phillips screw.
[* orange] Two 1.9 mm Phillips screws.
- [* yellow] One 1.9 mm Phillips screw.
+ [* yellow] One 2.5 mm Phillips screw.
[* icon_note] If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.0 mm Phillips screw
[* orange] Five 1.9 mm Philips screws.
[* yellow] One 2.5 mm Phillips screw.