주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Thomas S. Lee- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Locate the three 9.7mm Phillips head screws inside the zipper compartment and unscrew them.
[* black] Once you remove the first 3 screws there are no more screws on the other side. There are just clamps that are holding the other side of the panel in place. The zipper panel should easily lift free from the device. However, sometimes it needs a little prying. With a little pressure, it will pop out (this was the most dificult part for me).
[* black] Once you remove the first 3 screws there are no more screws on the other side. There are just clamps that are holding the other side of the panel in place. The zipper panel should easily lift free from the device. However, sometimes it needs a little prying. With a little pressure, it will pop out (this was the most dificult part for me).