주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Locate the three 9.7mm Phillips head screws inside the zipper compartment and unscrew them.
[* black] Once you removeLift the first 3 screws there are no more screws onzipper panel out of the other side. There are just clamps that are holding the otherspeaker.
[* icon_note] The
side of the panel opposite the screws is held in placeplace by small clamps. The zipper panel should easily lift free from the device. However, sometimes it needs a littledevice, but may require gentle prying. With a little pressure, it will pop out (this was the most dificult part for me).
[* black] Once you removeLift the first 3 screws there are no more screws onzipper panel out of the other side. There are just clamps that are holding the otherspeaker.
[* icon_note] The
side of the panel opposite the screws is held in placeplace by small clamps. The zipper panel should easily lift free from the device. However, sometimes it needs a littledevice, but may require gentle prying. With a little pressure, it will pop out (this was the most dificult part for me).