주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#7단계의 변경 사항

Paul- 에 의해 수정

편집 승인됨 완료자 Paul

이전
이후
변경 사항이 없습니다

단계 라인

[* red] To remove the blue LED, carefully pull the LED through the holes on the connector.
[* black] To add the new LED, make sure to connect the longer metal side (positive end) to the red side on the connector (positive end). The shorter end (negative side) should be connected to the black wire (negative side).
[* black] Once the LED is in, to make sure the LED stays connected, bend the metal ends at least 90 degrees to prevent it from sliding out of the connector.
[* black] For reassembly of the device, put the LED back under the dial and make sure to follow steps 1-5 in reverse order.