물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Richard-

편집 승인됨 완료자 Richard

이전
이후
변경 사항 없음

단계 라인

+[* black] Use a heat gun over the digitizer ribbon cable to soften the adhesive that secures it to the plastic housing.
+[* icon_note] Hold the heat gun 2-3 inches from the device, and move the heat gun from side to side to apply heat evenly.
+[* black] Gently wedge a spudger between the ribbon cable and the plastic housing to release the ribbon cable from the adhesive.