이 단계의 변경 사항
단계 라인
| [* black] Insert the flat end of a [product|IF145-002-2|nylon spudger] just below the battery ribbon cable. | |
| [* black] Carefully work the spudger along the bottom of the battery to free it from the adhesive. | |
| [* icon_caution] Do not bend or puncture the battery. | |
| + | [* icon_note] If the adhesive under your battery is stubborn, use a heat gun to soften the seal. Set your heat gun to "Low" and apply heat 8-10 inches from the battery as needed. |