주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#4단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Lift the black plastic faceplate out of the optical bay enclosure.
[* [* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[* [* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[* black] Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.
[* black] The enclosure should now look like the third picture in this step.