주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#2단계의 변경 사항

Skyler Bode- 에 의해 수정

편집 승인됨 완료자 Brendan

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Before detaching the LCD and digitiser connectors, removeWith tweezers, lift the two small screws at the top left (red box in previous step photo). Remove the metal shieldlocking flaps and disconnect the battery wire.
[* black] With tweezers,
detach the connected ribbon cables for both the LCD and digitizer.digitizer (blue bordered areas in previous step photo)
[* black] Before detaching the LCD and digitiser connectors, removeWith tweezers, lift the two small screws at the top left (red box in previous step photo). Remove the metal shieldlocking flaps and disconnect the battery wire.
[* black] With tweezers,
detach the connected ribbon cables for both the LCD and digitizer.digitizer (blue bordered areas in previous step photo)
[* black] Using a spudger lift the gold- colored base up away from the adhesive.
[* icon_note] This particularly ribbon connection will likely be difficult to detach from the casing. Proceed with patience and caution during removal process.
[* icon_note] Check your replacement LCD to see if it includes a new ribbon cable (black one in second photo). If not, you'll need to peel up the tape securing it, and disconnect it at the LCD end instead of the motherboard end.