주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

sbazile- 에 의해 수정

편집 승인됨 완료자 sbazile

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] First, unscrew the eight 12.93mm Phillips head screws indicated in red. These screws hold the two primary speakers in place.
-[* black] Next, remove the four 9.75mm Phillips head screws for the two smaller speakers indicated in blue and the speakers should lift out with little effort.
+[* red] First, unscrew the eight 12.93mm Phillips head screws indicated in red. These screws hold the two primary speakers in place.
+[* blue] Next, remove the four 9.75mm Phillips head screws for the two smaller speakers indicated in blue and the speakers should lift out with little effort.
[* icon_note] Note: All speakers are connected via the single ribbon cable highlighted in the previous step.