주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Ross Volenec- 에 의해 수정

편집 승인됨 완료자 Ross Volenec

이전
이후
변경 사항이 없습니다

단계 라인

[* red] First, unscrew the eight 12.93mm Phillips head screws indicated in red. These screws hold the two primary speakers in place.
[* blue] Next, remove the four 9.75mm Phillips head screws for the two smaller speakers indicated in blue and the speakers should lift out with little effort.
-[* icon_note] Note: All speakers are connected via the single ribbon cable highlighted in the previous step.
+[* icon_note] Note: All speakers are connected via the single cable highlighted in the previous step.