주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#13단계의 변경 사항

Derek- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Disconnect the camera from the motherboard. There are 1.5mm gaps on either side of the connector between the connector and its port. Put the pointed end of the spudger in one gap at a time and "walk" the connector out by wedging out the connector on each side.
[* [* icon_note] If it is difficult to pry out the connector completely with the spudger, you may remove it by hand by pulling it out, as shown in the pictures to the lefthand.
[* [* icon_note] If it is difficult to pry out the connector completely with the spudger, you may remove it by hand by pulling it out, as shown in the pictures to the lefthand.