메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Heat the perimeter of the display using an iOpener, hair dryer, or heat gun.
[* icon_note] Heat will help soften the adhesive securing the display, making it easier to separate. The display should be heated until it's slightly too hot to touch, for roughly two minutes.
Use extra caution if working with a heat gun, as applying too much heat will permanently damage the OLED panel.
[* black] Use a suction cup
tweezers to lift one edge ofpeel up the screen just slightly, creating a small gap betweentape at the display and the frametop of the phone.
[* black] Insert an opening pick into the gap.
[* black] Carefully slide the opening pick around the perimeter of the phone to separate the adhesive.
[* icon_caution] If you plan to re-use the display, don't insert the opening pick more than a few millimeters into the phone, or you may damage the OLED panel underneath the glass.
[* icon_note] You may need to slide the pick around the perimeter multiple times to fully separate the adhesive. Work slowly and carefully until the display begins to come free.
[* black] Gently lift the display, but don't try to fully detach it yet—it is still connected by a ribbon cable lying underneath
interconnect cable.
[* black] Heat the perimeter of the display using an iOpener, hair dryer, or heat gun.
[* icon_note] Heat will help soften the adhesive securing the display, making it easier to separate. The display should be heated until it's slightly too hot to touch, for roughly two minutes.
Use extra caution if working with a heat gun, as applying too much heat will permanently damage the OLED panel.
[* black] Use a suction cup
tweezers to lift one edge ofpeel up the screen just slightly, creating a small gap betweentape at the display and the frametop of the phone.
[* black] Insert an opening pick into the gap.
[* black] Carefully slide the opening pick around the perimeter of the phone to separate the adhesive.
[* icon_caution] If you plan to re-use the display, don't insert the opening pick more than a few millimeters into the phone, or you may damage the OLED panel underneath the glass.
[* icon_note] You may need to slide the pick around the perimeter multiple times to fully separate the adhesive. Work slowly and carefully until the display begins to come free.
[* black] Gently lift the display, but don't try to fully detach it yet—it is still connected by a ribbon cable lying underneath
interconnect cable.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

삭제되었습니다