메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Andrew Ferguson- 에 의해 수정

편집 승인됨 에 의해 Andrew Ferguson

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blackred] Use the T5 screwdriver to undo the two black, 4mm screws which hold the screen connector shield in place.
[* blackred] Use the T5 screwdriver to undo the two black, 4mm screws which hold the screen connector shield in place.
[* black] After the shield has been removed, use the spudger or your fingernail to lift off the connector that holds the screen in place, being careful not to damage the connector.
[* black] Once the connector is removed, remove the display assembly completely and place it off to the side.

이미지 1

이전 버전

새로운 버전