Skip to main content

#3 단계의 변경 사항

Anand Rajiv- 에 의해 수정

편집 승인됨 에 의해 Anand Rajiv

변경 사항이 없습니다

스텝 라인

[* red] Use the T5 screwdriver to undo the two black, 4mm screws which hold the screen connector shield in place.
[* black] After the shield has been removed, use the spudger or your fingernail to lift off the connector that holds the screen in place, being careful not to damage the connector.
[* black] Once the connector is removed, remove the display assembly completely and place it off to the side.

이미지 2


이미지 3