메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.
[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 이미지가 없습니다

추가