주요 콘텐츠로 건너뛰기

#5 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the seven black 4mm T5 screws.
[* orange] Remove the
The battery is secured by two silver 3mm T5 screws which secure the mid frame assemblystrips of double-sided tape.
[* icon_note] There will be clicks as you takeblack] [guide|25705|Heat an iOpener|new_window=true] and place it on the mid frame outback of the phone duephone's '''left''' edge for two minutes. You may need to reheat and reapply the clips that normally hold it in place.
[* black] Lift the mid frame from the rear casing by pulling it upwards
iOpener.
[* red] Remove the seven black 4mm T5 screws.
[* orange] Remove the
The battery is secured by two silver 3mm T5 screws which secure the mid frame assemblystrips of double-sided tape.
[* icon_note] There will be clicks as you takeblack] [guide|25705|Heat an iOpener|new_window=true] and place it on the mid frame outback of the phone duephone's '''left''' edge for two minutes. You may need to reheat and reapply the clips that normally hold it in place.
[* black] Lift the mid frame from the rear casing by pulling it upwards
iOpener.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전