메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Pull on the perforated tab at the top of the battery[guide|25705|Heat an iOpener|new_window=true] and peelplace it downon the centerback of the phone.
[* black] Grab the tab firmly and pull with firm, steady pressure. Slowly, the adhesive securing the battery will give way and the battery should come free.
[* icon_note] If the tab rips or you are unable to free the battery, you
phone's '''right''' edge for two minutes. You may use a plastic card (such as a credit card) or spudgerneed to pry up the battery.
[* icon_caution] Use extreme care when handling the battery. A puncture or bend could result in a fire.
[* black] To install a new battery:
[* black] Remove any remaining adhesive from the phone,
reheat and cleanreapply the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with [guide|113604|pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
iOpener.
[* black] Pull on the perforated tab at the top of the battery[guide|25705|Heat an iOpener|new_window=true] and peelplace it downon the centerback of the phone.
[* black] Grab the tab firmly and pull with firm, steady pressure. Slowly, the adhesive securing the battery will give way and the battery should come free.
[* icon_note] If the tab rips or you are unable to free the battery, you
phone's '''right''' edge for two minutes. You may use a plastic card (such as a credit card) or spudgerneed to pry up the battery.
[* icon_caution] Use extreme care when handling the battery. A puncture or bend could result in a fire.
[* black] To install a new battery:
[* black] Remove any remaining adhesive from the phone,
reheat and cleanreapply the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with [guide|113604|pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
iOpener.

이미지 1

이전 버전

새로운 버전

이미지 2

삭제되었습니다

이미지 3

삭제되었습니다