Skip to main content

#7 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Pull on the perforated tab at the top of the battery and peel it down the center of the phone.
[* black] Grab the tab firmly and pull with firm, steady pressure. Slowly, the adhesive securing the battery will give way and the battery should come free.
[* blackicon_note] If the tab rips or you are unable to free the battery, you may use a plastic card (such as a credit card) or spudger to pry up the battery.
[* icon_caution] Use extreme care when handling the battery. A puncture or bend could result in an explosiona fire.
[* black] To install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
.
[* blackicon_note] If the tab rips or you are unable to free the battery, you may use a plastic card (such as a credit card) or spudger to pry up the battery.
[* icon_caution] Use extreme care when handling the battery. A puncture or bend could result in an explosiona fire.
[* black] To install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
.