메인 콘텐츠로 스킵하기

#9 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery.
[* icon_reminder] To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned.
[* black] Tear two adhesive strips from the adhesive card, and apply them to the frame. Do not remove the top liner yet.
[* black] Place the new battery in the recess.
[* black] Use the flat end of a spudger or your finger to connect''temporarily ''connect the battery connector to the motherboard.
[* black] Use the flat end of a spudger or your finger to connect''temporarily ''connect the battery connector to the motherboard.