Skip to main content

#10 단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 에 의해 Arthur Shi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] While the battery is still connected, lift the bottom end of the battery up.
[* black] Use tweezers to pull all of the adhesive liners off.
[* black] Carefully lower the battery back into place and press against the edges to activate the adhesive.
[* black] Use a spudger to pry up and disconnect the battery connector from the motherboard and bend it away slightly.
[* black] Continue with the reassembly process.

이미지 3

이전 이미지가 없습니다

추가