HP Z1 Teardown 단계 #21 기록

#21단계의 변경 사항

편집자 Miroslav Djuric- 2012년 4월 25일

	[* black] So that's it for the bottom half of the computer. Now for the heavyweight LCD and glass.
	[* red] Removing some conveniently-placed T15 screws is all it takes to remove the LCD and glass from the rest of the machine.
	[* black] Despite the pile of screws left on the bench, we are relieved at the absence of [guide\|8277\|our nemesis, adhesive,\|stepid=33140] in HP's design.
-	[* black] ~~You~~ also ~~have~~ to remove about a dozen more screws to separate the glass and LCD, but hey -- they're the same-sized T15 screws, and the glass comes right off once the screws are removed! It's about as simple of a construction as it can get for a component that's this hefty.
+	[* black] One also has to remove about a dozen more screws to separate the glass and LCD, but hey -- they're the same-sized T15 screws, and the glass comes right off once the screws are removed! It's about as simple of a construction as it can get for a component that's this hefty.